Clarion NX602 Quick Start Guide & Installation Manual

English
24
NX602
1. Insert an USB device into the USB cable.
When connecting an USB device, the unit
YKNNTGCFVJGſNGUCWVQOCVKECNN[
2. To remove the USB device, you should
first select another source or turn off
VJGRQYGTKPQTFGTVQCXQKFFCOCIKPI
the USB device. Then take off the USB
device.
3. To access an USB device already
connected to the unit, long press [
ALL ]
button to enter main source menu, then
select [USB] to enter USB mode.
If [USB] is not on the current source menu,
touch [] buttons on the bottom of the
screen, or hold the center of screen and
FTCINGHVTKIJVVQUJQYOQTGKEQPU
1. Slide the cover of the card slot located on
the bottom left of the panel to the right.
Insert an SD card into the card slot.
9JGPKPUGTVKPICECTFVJGWPKVYKNNTGCF
VJGſNGUCWVQOCVKECNN[
 6QTGOQXGVJGECTF[QWUJQWNFſTUVUGNGEV
CPQVJGTUQWTEGQTVWTPQHHVJGRQYGTKP
order to avoid damaging the card. Press to
pop it out, then take off the card. Close the
cover to the left.
3. To access an SD card already inserted
in the unit, long press [
ALL ] button to
enter main source menu, then select [SD]
to enter SD mode.
If [SD] is not on the current source menu,
touch [] buttons on the bottom of the
screen, or hold the center of screen and
FTCINGHVTKIJVVQUJQYOQTGKEQPU
Accessing an USB
Accessing an SD Card
8. SD/USB OPERATION

Clarion NX602 Specifications

General

Brand	Clarion
Model	NX602
Category	Car Video System
Language	English