NX702 English 93
x Maneuver restrictions and directional constraints are taken into account when planning a
route.
x Roads are used only if access for trucks is allowed.
x Private roads, resident-only roads and walkways are excluded from routes.
x U-turns are excluded from routes (turning back on a divided road is not considered as a U-
turn).
Route Planning Method types:
Button Description
Gives a quick route if you can travel at or near the speed limit on all roads. Usually
the best selection for fast and normal cars.
Gives a short route to minimize the distance to travel. It can be practical for slow
vehicles. Searching for a short route regardless of the speed, this route type is
rarely practical for normal vehicles.
Gives a quick but fuel efficient route based on the fuel consumption data given in
Route settings (page 89). Travel cost and CO
2
emission calculations are
estimations only. They cannot take elevations, curves and traffic conditions into
account.
For vehicle types where Green routing is not available, this method combines the
benefits of Fast and Short: Clarion Mobile Map calculates as if it were calculating
the Fast route, but it takes other roads as well to save fuel.
Results in a route with fewer turns and no difficult maneuvers. With this option, you
can make Clarion Mobile Map to take, for example, the freeway instead of a series
of smaller roads or streets.
5.3.5 User profiles
If more drivers use Clarion Mobile Map for navigating, their settings can be remembered by using one of
the user profiles. Rename the profiles after tapping the edit button on the right so that all users know
which profile to use and switch between profiles by tapping its name. If you select a new profile, the
application restarts so that the new settings can take effect.
To Next Page
Loading...
Need help?
General
