Clarion NX702E User Manual

English
24
NX702E
8. SD/USB OPERATION
Accessing an USB
Accessing an SD Card
1. Insert an USB device into the USB cable.
When connecting an USB device, the unit
will read the les automatically.
2. To remove the USB device, you should
first select another source or turn off
the power, in order to avoid damaging
the USB device. Then take off the USB
device.
3. To access an USB device already
connected to the unit, long press [ MENU
ALL ] button to enter main source menu,
then select [USB] to enter USB mode.
If [USB] is not on the current source menu,
touch [ - ] buttons on the bottom of the
screen, or hold the center of screen and
drag left/right to show more icons.
1. Press [OPEN] button to slide down the
panel. Insert an SD card into the card slot
located on the left side of the panel.
When inserting a card, the unit will read
the les automatically.
2. To remove the card, you should rst select
another source or turn off the power, in
order to avoid damaging the card. Press to
pop it out, then take off the card. Close the
panel.
3. To access an SD card already inserted in
the unit, long press [ MENU
ALL ] button
to enter main source menu, then select
[SD] to enter SD mode.
If [SD] is not on the current source menu,
touch [ - ] buttons on the bottom of the
screen, or hold the center of screen and
drag left/right to show more icons.

Clarion NX702E Specifications

General

Brand	Clarion
Model	NX702E
Category	Car Video System
Language	English