Clarion NX702E User Manual

41
English
NX702E
Bluetooth
Problem Cause Measure
Cannot pair the
Bluetooth enabled
device with the car
audio system.
The device does not support the
proles required for the system.
Use another device to connect.
The Bluetooth function of the
device is not enabled.
Refer to the user manual of the device for how
to enable the function.
The audio quality
is poor after
connection with a
Bluetooth-enabled
device.
The internal microphone gain is
not set correctly.
Adjust the gain of the internal microphone in
System Setup.
The external microphone is
not set correctly nor properly
positioned.
Adjust the gain and position of the external
microphone.
For example, stick the microphone onto the
dashboard so it is close to the driver.
16. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
If an error display other than the ones described above appears, press the [RESET] button. If
the problem persists, turn off the power and consult your store of purchase.
* When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in
memory are cleared.
Display Cause Measure
Disc loading Disc is being read
Please wait, it may take several minutes
for some disc or storage device.
No Disc
Disc is dirty Clean disc with soft cloth
Disc is upside down Insert disc with label side up
Disc not present in loading
compartment
Insert disc
Unsupported
Disc
Disc is dirty Clean disc with soft cloth
Disc is upside down Insert disc with label side up
Unknown disc
Disc format is not compatible
with this unit
Change another disc.
Region Error
DVD is not compatible with
region code of unit
Use discs with corresponding regional
code.
Error Illegal mechanism operation
Press EJECT key for 5 seconds to reset
loading mechanism

Clarion NX702E Specifications

General

Brand	Clarion
Model	NX702E
Category	Car Video System
Language	English