30
2 - Video Mode Button
• If the Simple Control is set to the On [ ] in option
menu, the screen will become Simple Control Mode. It
can also display the video of iPod/iPhone regardless, it
is iPod Audio or iPod Video mode. But only “Previous
Track”、“Play/Pause” and “Next Track” can be
operated.
• Press the Video [ ] button will play from iPod.
Skipping a Track (Simple Control Mode)
Press the [ ] or [ ] button during playback. Tracks
are skipped, as many times as the button is pressed,
and playback starts.
• Pressing the [ ] button starts playback from the
beginning of the next track.
• Pressing the [ ] button starts playback from the
beginning of the current track.
When this button is pressed again within about 5
seconds, playback starts from the beginning of the
previous track.
Note: in Simple Control Mode, the best way is to control
the iPod just on iPod.
iPod Video Menu Operations
Connect your iPod/iPhone to the USB connector.
The system will automatically detect the connected
device and the iPod Video button will be enabled for
operation on the Main Menu screen.
• When an iPod/iPhone is already connected
Touch the [iPod Video] button on the Main Menu
screen. The system changes to the iPod Video mode,
and starts playback from the previous position.
Press [MENU] button on Operational Panel to return
to the Main Menu.
• Viewing video data in the iPod/iPhone (only for the
iPod/iPhone with video features)
When you connect an iPod/iPhone with video features
by using the optional connector cable for iPod/iPhone
with video, you can enjoy the video data and slide
show data stored in the iPod/iPhone and show them
on the display of this unit (and the rear monitor if
connected).
iPod Video ID3 Mode Screen
1 - Option Button
2 - Repeat Button
3 - Play/Pause Button
4 - Next Track Button
5 - Playing File Title
6 - Next Page / Previous Page Button
7 - Category List
8 - System Time
9 - REG,PTY,AF,TA,TP Status
12
3
4
5
21
13
810
11
14
15
9
7
6
To Next Page
Loading...
Need help?
General
