Disassembly
Removing and Installing the Processor 2 - 17
2.Disassembly
Removing and Installing the Processor
Processor Removal Procedure
1. Turn off the computer, remove the battery (page 2 - 5) and video card-2 heatsink (page 2 - 14).
2. Remove screws - from the heat sink unit in the order indicated on the label (i.e screw first through to
screw last Figure 12a)
.
3. Carefully (it may be hot) remove the heat sink unit (Figure 12b).
Figure 12
Processor
Removal
Procedure
a. Remove the screws
in the correct order.
b. Carefully remove
the heat sink unit.
5. Heat Sink Unit
•4 Screws
a.
5
b.
Note:
Loosen the screws in the reverse
order 4-3-2-1 as indicated.
3
4
1
2
To Next Page
Loading...
Need help?
General
