ComAp InteliATS NT STD User Manual

InteliATS
NT
STD, SW version 2.0, ©ComAp – June 2010 11
IA-NT- STD-2.0-Reference Guide.pdf
IL-NT RS232 Communication module
NT
IL-NT RS232 is optional plug-in card to enable InteliATS for RS232 communication. This is required
for computer connecting. Card inserts into expansion slot back on the controller.
To insert the module, you must open the cover first (use screwdriver to open) and then
module into slot. Once you ha
insert the
ve inserted it, the module will snap under plastic teeth. It is supposed to
be installed permanently. Should you need to remove it, the safest way is to remove whole back cover
and than remove module manually.
How to install RS 232 communication module:
NOTE:
The following procedure is analogic also for other communication modules.
1. Insert a screwdriver into the slot of the cover.
2. Move the screwdriver to set apart the small cover. Be careful!
3. Remove the small cover.

ComAp InteliATS NT STD Specifications

General

Brand	ComAp
Model	InteliATS NT STD
Category	Controller
Language	English