Read this manual completely before working on, or
making adjustments to, the Compac equipment
Compac Industries Limited accepts no liability for
personal injury or property damage resulting from
working on or adjusting the CNG equipment
incorrectly or without authorisation.
Along with any warnings, instructions, and
procedures in this manual, you should also observe
any other common sense procedures that are
generally applicable to equipment of this type.
Failure to comply with any warnings, instructions,
procedures, or any other common sense procedures
may result in injury, equipment damage, property
damage, or poor performance of the Compac
equipment
The major hazard involved with operating this
Compac CNG unit is electrical shock. This hazard
can be avoided if you adhere to the procedures in
this manual and exercise all due care.
Compac Industries Limited accepts no liability for
direct, indirect, incidental, special, or consequential
damages resulting from failure to follow any
warnings, instructions, and procedures in this
manual, or any other common sense procedures
generally applicable to equipment of this type. The
foregoing limitation extends to damages to person or
property caused by the Compac CNG unit, or
damages resulting from the inability to use the
Compac CNG equipment, including loss of profits,
loss of products, loss of power supply, the cost of
arranging an alternative power supply, and loss of
time, whether incurred by the user or their
employees, the installer, the commissioner, a
service technician, or any third party.
Compac Industries Limited reserves the right to
change the specifications of its products or the
information in this manual without necessarily
notifying its users.
Variations in installation and operating conditions
may affect the performance of Compac CNG
equipment. Compac Industries Limited has no
control over each installation's unique operating
environment. Hence, Compac Industries Limited
makes no representations or warranties concerning
the performance of the Compac CNG equipment
under the actual operating conditions prevailing at
the installation. A technical expert of your choosing
should validate all operating parameters for each
application.
Compac Industries Limited has made every effort
to explain all servicing procedures, warnings, and
safety precautions as clearly and completely as
possible. However, due to the range of operating
environments, it is not possible to anticipate every
issue that may arise. This manual is intended to
provide general guidance. For specific guidance
and technical support, contact your authorised
Compac supplier, using the contact details in the
Product Identification section.
Only parts supplied by or approved by Compac
may be used and no unauthorised modifications to
the hardware of software may be made. The use of
non-approved parts or modifications will void all
warranties and approvals. The use of non-
approved parts or modifications may also constitute
a safety hazard.
Information in this manual shall not be deemed a
warranty, representation, or guarantee. For
warranty provisions applicable to the Compac CNG
equipment, please refer to the warranty provided
by the supplier.
Unless otherwise noted, references to brand
names, product names, or trademarks constitute
the intellectual property of the owner thereof.
Subject to your right to use the Compac CNG
equipment, Compac does not convey any right,
title, or interest in its intellectual property, including
and without limitation, its patents, copyrights, and
know-how.
Every effort has been made to ensure the accuracy
of this document. However, it may contain technical
inaccuracies or typographical errors. Compac
Industries Limited assumes no responsibility for
and disclaims all liability of such inaccuracies,
errors, or omissions in this publication.
To Next Page
Loading...
Need help?
General
