Craftsman 7-1/4 - in. Circular Saw with Laser Trac and LED Worklight User Manual

If the blade does not follow a straight line:
• Teeth are dull This is caused by hitting a hard object such as a nail, dulling
teeth on one slde_ The blade tends to cut to the side with the sharpest teeth,
• Base is out of line or bent.
° Blade is bent.
• Edge guide or straight edge Is not being used.
If the blade binds or smokes from friction:
• Blade is dull.
• Blade is on backwards.
• Blade ls bent.
° Workpiece is not properly supported.
oIncorrect blade is being used.
_ WARNING: The use of attachments or accessories that are not
recommended for this too! might be dangerous and could result in serious injury.
Sears and other Craftsman outlets have a large selection of 71/4-inch Craftsman
steel carbide-tipped blades designed for specific cutting applications.
Contractor bulk packs are also available°
Sears and other Craftsman outlets also offer sawhorses, combination and
framing squares, straight edges, edge guides, and a large assortment of
clamps to help you with all your sawing needs,
Visit your local Sears store or other Craftsman outlets or shop sears.corn/craftsman.
3O
L,,,

Craftsman 7-1/4 - in. Circular Saw with Laser Trac and LED Worklight Specifications

General

Brand	Craftsman
Model	7-1/4 - in. Circular Saw with Laser Trac and LED Worklight
Category	Saw
Language	English