16
5. Functional Specification
5.1 Filament Retreat
Method 1:
① Input the nozzle temperature on the screen and
wait for it to heat up to the target temperature.
② Unlock the extrusion switch. ③Remove the filament from the extruder.
④ Remove the PTFE tube from the top of the extruder.
⑤ Extract the filament from outside the printer.
②
Note: The current interface is for reference only. Due to the continuous upgrading of
functions, it shall be subject to the latest firmware UI published on the official website.
To Next Page
Loading...
Need help?
General
