Creality K1 Max User Manual

22
5.6 Network Settings
When the printer is connected to the network cable, you can click Settings → Local Network on the screen to check whether it is connected.
Click Settings → Network → WIFI Connection on the screen, select the corresponding WIFI and enter the password to finish the WIFI connection.
(only support 2.4 GHz).
5.6.1 Wired connection
5.6.2 WIFI connection
5. Functional Specification

Creality K1 Max Specifications

General

Brand	Creality
Model	K1 Max
Category	3D Printers
Language	English