Crestron DM-TX-201-C Supplemental Guide

8 • DM-TX-201-C Supplemental Guide — Doc. 6958E
1. Using the Device Discovery Tool, find the IP address of the DM-TX-201-C.
2.
In the Crestron Toolbox toolbar, click . The System Info window opens.
3. In the Address Book, select the DM-TX-201-C entry.
4. In the Functions menu, select IP Table Setup.
5. In the IP table, add, modify, or delete entries.
NOTES:
l The DM-TX-201-C can have only one IP table.
l The IP ID of multiple DM-TX-201-C devices in the same system must be
unique. The IP ID of each DM-TX-201-C that communicates with a control
system must match the corresponding IP ID specified in the SIMPL
Windows program.
6. Send the IP table to the DM-TX-201-C or save it to a file.
Configuration Using DMTool
DMTool in the Crestron Toolbox software allows configuration of EDID and management
of HDCP for the DM-TX-201-C. DMTool also provides detailed audio and video information
that can be used for troubleshooting. For additional information, refer to the Crestron
Toolbox help file.

Crestron DM-TX-201-C Specifications

General

Type	Network transmitter
Duplex system	Full, Half
Auto-negotiation	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Maximum transfer distance	- m
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3at
RJ-45 ports quantity (transmitter)	2
Product color	Black
Output current	0.75 A
Output voltage	24 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	32 mm
Width	187 mm
Height	165 mm
Weight	721 g