Current Solutions InTENSity Twin Stim III - Low Battery Indicator; Program Summary

TENSPros
4.12. Low battery indicator
When the low power indicator flashes, the device will be turned off
automatically, the battery should be replaced with a new one as
soon as possible. However, the unit may continue to operate for an
extended period depending on the setting intensity level.
5. Program
Mode Program Modulation
Method
Frequency Pulse
Width
Treatment time
TENS
B Burst 0.5-5Hz 50-300us 1-60min,continuous
N Continuous 1-150Hz 50-300us 1-60min,continuous
M
Pulse width
modulation
1-150Hz 50-300us 1-60min,continuous
M1
Frequency
modulation
1-150Hz 50-300us 1-60min,continuous
EMS
S
Synchronous
mode
1-150Hz 50-300us 1-60min,continuous
A
Asynchronous
mode
1-150Hz 50-300us 1-60min,continuous
D
Delay mode
1-150Hz 50-300us 1-60min,continuous
28