2) Apply the protective backing to the tacky side of the electrode.
Place the electrode on the side of the protective backing
that is labeled with the word on.
3) It may be helpful to improve repeated application by
spreading a few drops of cold water over the adhesive and
turn the surface up to air dry. Over Saturation with water will
reduce the adhesive properties.
4) Between uses, store the electrodes in the resealable bag in
a cool dry place.
CAUTION:
6.4 Cleaning the Electrodes cords
Clean the electrode cords by wiping them with damp cloth.
Coating them lightly with talcum powder will reduce tangles and
prolong the life.
6.5 Maintenance
1) Maintenance and all repairs should only be carried out by an
authorized agency. The manufacturer will not be held
Do not pull on the electrode wire. Doing so may damage
the wire and electrode.
Do not apply to broken skin.
The electrodes should be discarded when they are no
longer adhering.
The electrodes are intended for single patient use only.
If irritation occurs, discontinue use and consult your
clinician.
Read the instructions for use of self-adhesive electrodes
before application.
Always use the electrodes with CE mark, or are legally
marketed in the US under 510(K) procedure.
24
To Next Page
Loading...
Need help?
General
