PowerPanel™ Business Edition
45
z Input is near overload - A PDU is near an overload condition.
The load level is near the maximum safe load for the PDU.
z Input is overloaded - A PDU is in an overload condition.
The maximum safe load has been exceeded and the PDU is in an overload condition.
z Shutdown time is insufficient - System shutdown time is insufficient.
After communication with the PDU is established and the outlet assignment is set up, the Client will
detect whether the connected outlet has sufficient time to allow for a shutdown to complete. A sufficient
shutdown time for the Client computer requires at least the sum of the Necessary shutdown time option
and shutdown delay time as configured in the The output power is going to stop soon event.
To Next Page
Loading...
Need help?
General
