HE
AR
EN
25
WARNING!
The supporting leg (4) must always be
in direct contact with the vehicle floor. There must be
no objects or spaces between the vehicle floor and
the supporting leg. If there are storage compartments
in the floor of the vehicle you must contact the
vehicle manufacturer.
NOTE! Make sure that CYBEX SIRONA M2 i-Size still
rests flat on the car seat.
)4(9
)10(
Push the adjustment button (9) and pull the supporting leg
(4) out until it touches the vehicle floor. After this, pull the
foot out to the next locking position to ensure optimal force
transmission. The supporting leg indicator (10) on the base
will show GREEN and a characteristic ‚CLICK‘ may be heard.
ADJUSTING THE SUPPORTING LEG
)4(
!
!
To Next Page
Loading...
Need help?
General
