HE
AR
EN
41
Make sure that only an original CYBEX seat cover is used on
the seat because the cover is also a fundamental component
of the good functioning of the child seat.Replacement covers
may be purchased at authorised dealer.
Plastic parts, the belt system as well as the anti-slide-coating
of the shoulder belts can be cleaned with a wet cloth.
Do not wash the newborn inlay.
CLEANING
!
WARNING! Never use chemical cleaning or
bleaching agents.
!
REMOVING THE NEWBORN INLAY
The preinstalled newborn inlay helps to support lying
comfort and fit for the smallest babies.
The newborn inlay (25) may be removed after the baby is 61
cm (approx. 3 months) to provide more space for the child.
To remove the newborn inlay (25) open the snap buttons of
the headrest cover. Now first pull off the headrest cover and
then remove the newborn insert. After that put the headrest
cover back in place, reposition the shoulder belts and finally
close the snap buttons again.
)(
361
)(
30
NOTE!
Please wash the cover before you use it the first time.
The cover should be washed at 30° C in a delicate wash
cycle. Washing at higher temperatures than 30° C or by hand
may result in color bleeding. Wash separately from other
items and never tumble dry! Never dry in strong sunlight!
To Next Page
Loading...
Need help?
General
