DIR-842V2 AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
Selecting Operation Mode
Select the needed operation mode and click the NEXT button.
Router
In order to connect your device to a wired ISP, on the Device mode page, from the Connection
method list, select the Autonomous value. Then from the Work mode list select the Router
value. In this mode you can configure a WAN connection, set your own settings for the wireless
network in the 2.4GHz and 5GHz bands, configure LAN ports to connect an STB or VoIP phone,
and set your own password for access to the web-based interface of the device.
Figure 36. Selecting an operation mode. The Router mode.
In order to connect your device to the network of a 3G or LTE operator, on the Device mode
page, from the Connection method list, select the Autonomous value. Then from the Work
mode list select the Mobile Internet value. In this mode you can configure a 3G/LTE WAN
connection, set your own settings for the wireless network in the 2.4GHz and 5GHz bands, and set
your own password for access to the web-based interface of the device.
Figure 37. Selecting an operation mode. The Mobile Internet mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
