D-Link DAP-1160 Quick Install Guide

2
Note :
Using a power supply with a different
voltage rating will damage and void
the warranty of this product.
Quick Installation Guide
DAP-1160
DAP-1160
Wireless G Access Point
CD-ROM
(D-Link Click’n’Connect.
Manual and Warranty)
Ethernet (CAT5 UTP)
Cable
Power Adapter
If any of the items are missing, please contact your reseller.
Default IP: 192.168.0. 50
Default Username: Admin
Default Password:
1
Remove the D-Link Click and
Connect CD.
2
A. Be sure your Internet connection is
active. DO NOT plug the AP in yet.
B. Insert the D-Link Click’n Connect CD
into your computer.
C. Click
Quick Installation
Package Contents
WIRELESS G ACCESS POINT

D-Link DAP-1160 Specifications

General

Channels quantity	2 channels
Ethernet LAN data rates	100 Mbit/s
Maximum data transfer rate	54 Mbit/s
Internal	No
MAC address filtering	Yes