D-Link DCH-M225 User Manual

22D-Link DCH-M225 User Manual
Section 3 - Conguration
The Home screen displays current connection status for devices
connected to the DCH-M225. You can click on a device image to view
the current status of the device.
A detailed description of the Home screen is on the next page. The
bar at the top of the Home page provides quick access to the Settings
and Management functions.
Manual Conguration
Enter your Admin Password. If you did not create a password during
the Setup Wizard, leave the Admin Password eld blank by default.
Click Log In to proceed.
Open a web-browser (e.g., Internet Explorer, Chrome, Firefox, or
Safari) and enter http://dlinkap.local./. Or, you can enter the default
IP address of the DCH-M225, which is 192.168.0.50.
Note: Once the DCH-M225 connects to your router using the default IP address, it will be
assigned a new IP address based on your router/network’s DHCP settings. You will need to
log in to your router and view the DHCP table to see what IP address was assigned to the
DCH-M225. The MAC address is printed on the label on the DCH-M225.

D-Link DCH-M225 Specifications

General

Type	AV transmitter
Antenna type	Internal
Certification	FCC\\r IC\\r Wi-Fi Certified\\r CE
Product color	White
LED indicators	Yes
Maximum resolution	- pixels
Compatible products	DLNA, AirPlay
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA2, WPS
Audio input	1
Frequency	2400 MHz
Connector(s)	3.5mm Audio
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	110-125 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	81.6 g
Dimensions (WxDxH)	54.1 x 41.9 x 54.61 mm