D-Link DCH-M225 User Manual

19D-Link DCH-M225 User Manual
Section 2 - Product Setup
1. The Setup Wizard will assist you with connecting to your router
and conguring your Wi-Fi Audio Extender. Click Next to continue.
Setup Wizard
2. If your wireless device supports WPS, click on Select this option
if your wireless device supports WPS (Wi-Fi Protected Setup).
You will be prompted to press the WPS button on your router or
access point. Follow the instructions for WPS in Step 3.
If your wireless device does not support WPS, skip to Step 4 on
the next page .
Click Next to continue.
Use the Setup Wizard to guide you through the process of conguring your DCH-M225. From the Home
page, click on Setup Wizard. (If you already have a Wi-Fi network set up and you want to congure
your W-Fi Nework settings manually, refer to ”Wi-Fi Settings” on page 24.)

D-Link DCH-M225 Specifications

General

Type	AV transmitter
Antenna type	Internal
Certification	FCC\\r IC\\r Wi-Fi Certified\\r CE
Product color	White
LED indicators	Yes
Maximum resolution	- pixels
Compatible products	DLNA, AirPlay
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA2, WPS
Audio input	1
Frequency	2400 MHz
Connector(s)	3.5mm Audio
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	110-125 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	81.6 g
Dimensions (WxDxH)	54.1 x 41.9 x 54.61 mm