D-Link DCH-M225 User Manual

56D-Link DCH-M225 User Manual
Appendix D - Technical Specications
Technical Specications
Standards
• IEEE 802.11n
• IEEE 802.11g
Wireless Frequency Range
• 2.4 GHz to 2.4835 GHz
Antennas
• Two Internal Antennas
Security
• Wi-Fi Protected Access (WPA/WPA2)
• WPS™ (PBC)
Advanced Features
• QRS (Quick Router Setup) app for iOS and Android
Device Management
• Web UI
Diagnostic LEDs
• Status/WPS
Operating Temperature
• 32 to 104 ˚F (0 to 40 ˚C)
Operating Humidity
• 0% to 90% non-condensing
Power Input
• AC 110-240V
Maximum Power Consumption
• 5W
Certications
• Wi-Fi Certied
• FCC
• CE
• IC
• C-Tick
• CSA
Dimensions
• 2.13” x 1.65” x 2.15’’ (54 x 42 x 54.5mm)
Weight
• 0.18 lb (81.2 g)
Warranty
• 1-Year Limited Warranty
1 Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume
of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely aect wireless signal range.
2 Frequency Range varies depending on country’s regulation

D-Link DCH-M225 Specifications

General

Type	AV transmitter
Antenna type	Internal
Certification	FCC\\r IC\\r Wi-Fi Certified\\r CE
Product color	White
LED indicators	Yes
Maximum resolution	- pixels
Compatible products	DLNA, AirPlay
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA2, WPS
Audio input	1
Frequency	2400 MHz
Connector(s)	3.5mm Audio
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	110-125 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	81.6 g
Dimensions (WxDxH)	54.1 x 41.9 x 54.61 mm