D-Link DCS-2332L User Manual

18D-Link DCS-2332L User Manual
Section 2: Installation
If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Conguration. Zero Conguration automatically
congures your camera's settings for you and adds it to your mydlink account automatically. This type of setup allows you to
set up your camera by simply plugging it in and connecting it to your router.
Connect your camera to your mydlink-enabled Cloud Router and Zero Conguration will automatically congure your
DCS-2332L and automatically add the camera to your mydlink account. When setup is complete you can remotely access your
camera from the www.mydlink.com website to manage and monitor your DCS-2332L.
Connect the Ethernet Cable
Connect the free end of the pre-attached Ethernet cable to your network.
Attach the External Power Supply
Attach the external power supply to your wall outlet or power strip.
Installation
Zero Conguration Setup

D-Link DCS-2332L Specifications

General

Maximum resolution	1280 x 800 pixels
Supported video modes	720p
Video formats supported	H.264, M-JPEG, MPEG4
Minimum illumination	- lx
Sensor type	CMOS
Optical sensor size	1/4 \
Optical zoom	- x
Video motion detection	Yes
Built-in HDD	No
Compatible memory cards	SD, SDHC
Type	IP security camera
Certification	CE, CE LVD, FCC, C-Tick
Placement supported	Outdoor
Connectivity technology	Wireless
Form factor	Box
Product color	Black, White
Protection features	Water resistant
International Protection (IP) code	IP65
Browser supported	Internet Explorer, Firefox, Chrome
Audio system	2-way
Supported network protocols	TCP/IP
AC input voltage	100-240 V
DC output current	1.2 A
DC output voltage	+5V
AC input frequency	50 - 60 Hz
Power consumption (typical)	5.3 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	45.7 mm
Width	66 mm
Height	105.1 mm
Weight	255 g