D-Link DES-1005E User Manual

ENGLISH
17
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® 7 - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Change Adapter Setting.
Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.
Windows® XP - Click on Start > Control Panel > Network Connections.
Windows® 2000 - From the desktop, right-click My Network Places and select Properties.
Step 2
Right-click on the Local Area Connection which represents your network adapter and select
Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as
your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where
X is a number between 2 and 99. Make sure that the number you choose is not in use on the
network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary
DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.

D-Link DES-1005E Specifications

Data Transfer Rates

Ethernet data transfer rate (half duplex)	10 Mbps
Ethernet data transfer rate (full duplex)	20 Mbps
Fast Ethernet data transfer rate (half duplex)	100 Mbps
Fast Ethernet data transfer rate (full duplex)	200 Mbps

Power

external power adapter	5V/1.2A
power consumption (standby, DC input)	0.6 watts
power consumption (standby, AC input)	1.4 watts
power consumption (maximum, DC input)	3.3 watts
power consumption (maximum, AC input)	5.2 watts

Heat Dissipation

heat dissipation (standby, AC input)	6.138 BTU/h
heat dissipation (maximum, AC input)	12.958 BTU/h

Operating Environment

operating temperature	0 to 50 ˚C (32 to 122 ˚F)
storage temperature	-10 to 70 ˚C (14 to 158 ˚F)
operating humidity	10% to 90% RH Non-Condensing
storage humidity	5% to 90% RH Non-Condensing

Weight and Dimensions

dimensions (W x D x H)	5.0” x 3.3” x 1.2” (125.3 x 83.4 x 29.1 mm)