D-Link DES-1005E User Manual

ENGLISH
7
Product Overview
Setup
The setup of the DES-1005E can be performed using the following steps:
• Thepoweroutletshouldbewithin1.82meters(6feet)oftheSwitch.
• VisuallyinspecttheDCpowerjackandmakesurethatitisfullysecuredtothepoweradapter.
• DonotcovertheventilationholesonthesidesoftheSwitch,andmakesurethereisadequateventilationaroundit.
• Donotplaceheavyobjectsontheswitch.
Package Contents
Introduction
Fast Ethernet Technology
The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance
networks.100BASE-TX (FastEthernet) providesacost-eectiveand high-performancesolutionfor smallworkgroups,SMBs(SmalltoMedium
Businesses), and any network supporting bandwidth-intensive applications. Fast Ethernet technology operates at 10 times the speed of traditional
Ethernet,oeringmaximumperformanceandenhancedcapabilityforexistingEthernet-basednetworks.
100Mbps Fast Ethernet is a standard specied by the IEEE 802.3 LAN committee. It is an extension of the 10Mbps Ethernet standard with the ability
to transmit and receive data at 100Mbps, while maintaining the CSMA/CD Ethernet protocol. Since the 100Mbps Fast Ethernet is compatible with all
other 10Mbps Ethernet environments, it provides a straightforward upgrade and takes advantage of the existing investment in hardware, software,
and personnel training.
WallMountKit
D-Link DES-1005E 5-port Desktop Switch
Power Adapter
Warranty Card
Quick Install Guide

D-Link DES-1005E Specifications

Data Transfer Rates

Ethernet data transfer rate (half duplex)	10 Mbps
Ethernet data transfer rate (full duplex)	20 Mbps
Fast Ethernet data transfer rate (half duplex)	100 Mbps
Fast Ethernet data transfer rate (full duplex)	200 Mbps

Power

external power adapter	5V/1.2A
power consumption (standby, DC input)	0.6 watts
power consumption (standby, AC input)	1.4 watts
power consumption (maximum, DC input)	3.3 watts
power consumption (maximum, AC input)	5.2 watts

Heat Dissipation

heat dissipation (standby, AC input)	6.138 BTU/h
heat dissipation (maximum, AC input)	12.958 BTU/h

Operating Environment

operating temperature	0 to 50 ˚C (32 to 122 ˚F)
storage temperature	-10 to 70 ˚C (14 to 158 ˚F)
operating humidity	10% to 90% RH Non-Condensing
storage humidity	5% to 90% RH Non-Condensing

Weight and Dimensions

dimensions (W x D x H)	5.0” x 3.3” x 1.2” (125.3 x 83.4 x 29.1 mm)