D-Link DHP-600AV User Manual

15D-Link DHP-600AV/DHP-601AV User Manual
Section 3 - Installation Considerations
Powerline Installation Considerations
Plan the location of your Powerline devices:
1. Connect Powerline devices to electrical outlets that are not controlled by a wall
switch to avoid accidentally turning o power to the device.
2. Do not connect the Powerline devices to an extension cord, surge protector, or
power strip as this might prevent it from working correctly, or reduce the network
performance.
3. Avoid using the Powerline devices in an electrical outlet that is located near an
appliance that uses a lot of power, such as a washer or dryer, or a refrigerator. This
may prevent the adapter from working correctly, or negatively impact network performance.
4. Verify that your Powerline devices are electrically rated to operate with the power available in your location.
5. To help prevent electrical shock, be sure to plug the power cables into properly grounded electrical outlets.
6. The Powerline device is designed to help ensure proper grounding. Do not use adapter plugs or remove the grounding
prong from the cable.

D-Link DHP-600AV Specifications

General

Encryption	128-bit AES
Operating Frequency	2 MHz to 68 MHz
Operating Humidity	10% to 90% non-condensing
Type	Powerline Adapter
Interface	Gigabit Ethernet
Range	Up to 300 meters over electrical wiring
Operating Voltage	100-240V AC
Operating Temperature	0°C to 40°C (32°F to 104°F)