2D-Link DHP-600AV/DHP-601AV User Manual
D-Link reserves the right to revise this publication and to make changes to the content herein without obligation to notify any person or organization
of such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2016 by D-Link Corporation, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation,
Inc.
Power Usage
This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network
Standby mode within 1 minute of no packets being transmitted. If it is not needed during certain periods of time, it can be unplugged to save
energy.
Network Standby: 2.44 watts
Revision Date Description
1.00 May 27, 2013 • Initial release for hardware revision A1
2.00 November 25, 2014 • Hardware revision B1
3.00 June 16, 2016 • Hardware revision C1
Preface
To Next Page
Loading...
Need help?
General
