D-Link DIR-518L User Manual

114D-Link DIR-518L User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP Address
In Windows:
Click on Start > Run.
In the run box type cmd and click OK. (Windows® 7/Vista® users
type cmd in the Start Search box.)
At the prompt, type ipcong and press Enter.
This will display the IP address, subnet mask, and the default
gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security
settings, and the settings on your router. Some rewall software
programs may block a DHCP request on newly installed adapters.
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

D-Link DIR-518L Specifications

General

Brand	D-Link
Model	DIR-518L
Category	Network Router
Language	English