EasyManuals Logo

D-Link DIR-601 User Manual

D-Link DIR-601
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
6D-Link DIR-601 User Manual
Section 2 - Installation
Before you Begin
This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area
such as a closet, cabinet, or in the attic or garage.
Please congure the router with the computer that was last connected directly to your modem.
You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must
turn o your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn
the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet).
If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump,
or Enternet 300 from your computer or you will not be able to connect to the Internet.
When running the Setup Wizard from the D-Link CD, make sure the computer you are running the CD from is connected to the
Internet and online or the wizard will not work. If you have disconnected any hardware, re-connect your computer back to the
modem and make sure you are online.
Installation

Table of Contents

Other manuals for D-Link DIR-601

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DIR-601 and is the answer not in the manual?

D-Link DIR-601 Specifications

Ports & Interfaces IconPorts & Interfaces
LAN ports4 10/100 LAN Ports
WAN port1 10/100 WAN Port
antenna typeExternal Antenna
Weight and Dimensions IconWeight and Dimensions
item dimensions4.4” x 5.7” x 1.2”
packaging dimensions8.2” x 10.8” x 2.7”
item weight0.1 lbs
packaging weight1.5 lbs

Related product manuals