D-Link DIR-601 User Manual

80D-Link DIR-601 User Manual
Section 4 - Security
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based conguration by opening a web browser and entering
the IP address of the router (192.168.0.1). Click on Setup and then click Wireless
Settings on the left side.
2. Select the Manual Wireless Connection Setup button.
3. Next to Security Mode, select WPA-Enterprise.
4. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use Auto if you have
wireless clients using both WPA and WPA2.
5. Next to Cypher Type, select TKIP and AES, TKIP, or AES. If you have wireless
clients that use both types, use TKIP and AES.
6. Next to Group Key Update Interval, enter the amount of time before the group
key used for broadcast and multicast data is changed (3600 is default).
7. Next to Authentication Timeout, enter the amount of time before a client is
required to re-authenticate (60 minutes is default).
8. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server.
9. Next to RADIUS Server Port, enter the port you are using with your RADIUS server.
1812 is the default port.
10. Next to RADIUS Server Shared Secret, enter the security key
Congure WPA-Enterprise (RADIUS)

D-Link DIR-601 Specifications

Ports & Interfaces

LAN ports	4 10/100 LAN Ports
WAN port	1 10/100 WAN Port
antenna type	External Antenna

Weight and Dimensions

item dimensions	4.4” x 5.7” x 1.2”
packaging dimensions	8.2” x 10.8” x 2.7”
item weight	0.1 lbs
packaging weight	1.5 lbs