D-Link DIR-601 User Manual

101D-Link DIR-601 User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically.
To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows Vista
®
users type cmd in the Start Search box.)
At the prompt, type ipcong and press Enter.
This will display the IP address, subnet mask, and the default
gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security
settings, and the settings on your router. Some rewall software
programs may block a DHCP request on newly installed
adapters.

D-Link DIR-601 Specifications

Ports & Interfaces

LAN ports	4 10/100 LAN Ports
WAN port	1 10/100 WAN Port
antenna type	External Antenna

Weight and Dimensions

item dimensions	4.4” x 5.7” x 1.2”
packaging dimensions	8.2” x 10.8” x 2.7”
item weight	0.1 lbs
packaging weight	1.5 lbs