D-Link DIR-850L User Manual

79D-Link DIR-850L User Manual
Section 3 - Conguration
The QoS Engine supports overlaps between rules, where more than one rule can match for a specic message ow. If more than one
rule is found to match the rule with the highest priority will be used.
Create a name for the rule that is meaningful to you.
The priority of the message ow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority
(least urgent).
The protocol used by the messages.
The rule applies to a ow of messages whose LAN-side IP address falls within the range set here.
The rule applies to a ow of messages whose LAN-side port number is within the range set here.
The rule applies to a ow of messages whose WAN-side IP address falls within the range set here.
The rule applies to a ow of messages whose WAN-side port number is within the range set here.
Select a service or port you want to assign to this rule.
Classication
Rules:
Name:
Queue ID:
Protocol:
Local IP Range:
Local Port
Range:
Remote IP
Range:
Remote Port
Range:
Application Port:
After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that
require the use of trac control and data priority manipulation.
Click on the Save Settings button to accept the changes made or click on the Don’t Save Settings button to discard the
changes made.

D-Link DIR-850L Specifications

Operating Environment

operating temperature	32 ~ 104 °F (0 ~ 40 °C)
non-operating temperature	-4 ~ 149 °F (-20 ~ 65 °C)
operating humidity	10% - 90% non-condensing

Power

input voltage	100~240 V (±20%), 50~60 Hz
output voltage	DC 12 V
output current	2 A

Wireless Specifications

wireless interface 2.4 GHz	IEEE 802.11b/g/n
wireless interface 5 GHz	IEEE 802.11a/n/ac
antenna type	Two dual-band internal antennas (2.4 GHz and 5 GHz)

Weight and Dimensions

dimensions	93 x 116 x 145 mm (3.7 x 4.6 x 5.76 inches)
weight	330 grams (11.6 ounces)