DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
0*
On the SkyDNS / Devices page, you can assign a specific filtering profile to a device connected
to the router's network.
Figure 144. The SkyDNS / Devices page.
In the Known Clients section, the devices connected to the local network of the router at the
moment and their relevant filtering profile are displayed.
To assign a specific filtering profile for a device, click the ADD button ( ) in the Device List
section or left-click the name of the filtering profile in the line of the device for which a profile
should be assigned in the Known Clients section.
Figure 145. The SkyDNS / Devices page. The window for adding a rule.
In the opened window, specify the following parameters:
Parameter Description
MAC address
The MAC address of a device from the router's LAN to which the
specified filtering profile will be applied. You can enter the MAC
address of a device connected to the router's LAN at the moment. To
do this, select the relevant device from the drop-down list (the field
will be filled in automatically).
Profile
Select the filtering profile which will be used for the device with the
specified MAC address from the drop-down list.
Hostname Enter a name for the rule for easier identification. Optional.
After specifying the needed parameters, click the SAVE button.
Page 186 of 191
To Next Page
Loading...
Need help?
General
Weight and Dimensions
