External Features
D-Link DPR-2000 User Manual 5
External Features
The DPR-2000’s USB printer ports are located on the rear panel of this Print Server
and are configurable using the web configurator.
The default IP address of the DPR-2000 is automatically acquired from a DHCP
server on the network. If a DHCP server cannot be found, use the default IP address
for the DPR-2000, which is 192.168.0.10.
NOTE: Your PC’s IP Address must be in the same subnet as the Print Server’s IP
Address for the two devices to communicate. (For example, if the Print Server’s IP
Address is 192.168.0.10, with a subnet mask of 255.255.255.0, then your
computer’s IP Address should be 192.168.0.x, where x is a value between 1 and 254,
excluding 10.)
To Next Page
Loading...
Need help?
General
