D-Link DPR-2000 User Manual

Using the Web Configurator
Reboot
ing the
Reboot button will re-boot your Print Server. A re-boot is required after you have
made changes to the Print Server’s settings, so the Print Server can apply the new
settings.
The Reboot is located at the bottom of the left column of the screen. Press
ait until the message disappears. Your Print Server should now begin to use its
new settings.
After you have pressed the Reboot button, the following message will appear:
W
D-Link DPR-2000 - User Manual 77

D-Link DPR-2000 Specifications

General

Brand	D-Link
Model	DPR-2000
Category	Print Server
Language	English