DAELIM CORDI User Manual

<TURNING ON HEADLIGHT>
Put main switch key in “ON” position and
turn on headlight switch.
<HEADLIGHT HIGH BEAM SWITCH>
High beam or low beam can be operated
by the use of high/low beam switch.
HIGH BEAM
...... used when needing extra
light.
LOW BEAM
...... used when other vehicles
are present, in the city, etc.
If this switch is turned on when the main
switch is in an ON position, the winker will
operate.
⇨ (R)....used when making a right turn.
⇦ (L)....used when making a left turn.
12
WINKER SWITCH
CAUTION
●The winker switch does not auto-
matically turn back to its original
position after completing the turn.
Please set the switch back to its
center position after turning.
CAUTION
●Use the high beam only in the
suburban road or when the usage of
the high beam not hinder the safe
driving of the car ahead.
HEADLIGHT
HEADLIGHTSWITCH
(HI)
D
(LO)
D
SWITCH POSITION FUNCTION
Headlight, taillight,
position lamp and
meter lights on.
Position lamp, taillight,
and meter lights on.
Light turned off.
(OFF)
(P)
(H)
HEADLIGHTHIGHBEAMSWITCH
WINKERSWITCH

DAELIM CORDI Specifications

General

Brand	DAELIM
Model	CORDI
Category	Scooter
Language	English