DAELIM CORDI User Manual

28
<CHECK>
If the oil is low, the oil warning indicator
will turn on. Turn the main switch to ON
in order to check whether the oil warning
indicator switches on. If it does, put oil in
the oil tank.
<HEADLIGHT, TAILLIGHT>
Start the engine and make sure the lights
turn on. Also check to see if the lights are
damaged or if there is dirt on them.
<BRAKE LIGHT CHECK>
Turn the main switch to ON.
While separately operating the front and
rear brakes, check to see if the brake light
turns on. Also check to see if there is any
damage to the lens or if there is dirt on the
brake light.
<WINKER CHECK>
Turn the main switch to ON.
Check to see if all the winker in the front
and rear of the vehicle(including left and
right sides) are flashing properly. At the
same time, check to make sure that the
automatic sound signal of the winker is
working. Check also to see if any of the
lens are damaged or dirty.
Sit squarely on the seat and check to see if
you have a good view behind the vehicle
by looking at the back mirrors. Also check
for dirt and damage on the back mirrors.
Check to see if there is any leaking fuel by
thoroughly checking the fuel tank, hose,
carburetor, etc.
Check to see if there is any dirt or damage
to the license plate.
Also check to see if the license plate is
firmly secured to the vehicle.
ENGINE OIL CHECK LIGHTS AND WINKER INSPECTION BACK MIRROR INSPECTION
FUEL LEAK INSPECTION
LICENSE PLATE INSPECTION
CAUTION
●Do not allow the engine to stay at a
low level. The engine will become
severely damaged if the vehicle is
driven while the oil warning
indicator is on.
CAUTION
●If any fuel is spilled, make sure the
area is dry before starting the engine.
OILWARNINGINDICATOR

DAELIM CORDI Specifications

General

Brand	DAELIM
Model	CORDI
Category	Scooter
Language	English