40
PR 19 – – – – –
MONO
CLOCK 1 2 : 0 0
PR 19 – – – – –
AV 1
CLOCK 1 2 : 0 0
PR 19 – – – – –
AV 3
CLOCK 1 2 : 0 0
PR 19 – – – – –
AV 2
CLOCK 1 2 : 0 0
Selection of AV and
Multimedia Input Signal
When watching video, Camcorder, DVD, Cable TV with AV
- See page 12 for connection method of Camcorder and Video.
- When pressing ”
” button on the TV set, screen changes as follows:
TV => AV1 => AV2 => AV3/S-Video => PC => HDMI => Component => TV
1. Pressing the “AV” button on the remote controller.
• The screen changes as follows:
TV => AV1 => AV2 => AV3/S-Video => TV
Note :
Cautions in menu setup
• The menu disappears if you do not operate any button for about 25 seconds from the menu.
• In the case of connecting both composite video signal and S-video signal at the AV3 terminal, the S-video signal
has priority.
• If sound signal is mono only, connect it to the L-terminal of the sound input terminal.
To Next Page
Loading...
Need help?
General
