To Next Page

To Previous Page

- 9 -

System Connections

• Open the back cover on the right side of the unit’s rear panel.

• Do not connect the power cord until all other connections have been made.

• Ensure that you observe the colour code when connecting audio and video cables.

Connecting to Power Supply

Connect one end of the provided power adapter to the DC 12V IN jack on the side panel of the unit

and the other end to the AC wall outlet.

Connecting to External AV Signal Source

Use the AV cables to connect the external AV signal source to the AV input jacks on the rear panel

of the unit. Use an S-VIDEO cable (not supplied) to connect the external AV signal source to the

S-VIDEO input jack on the rear panel of the unit.

After connection, turn on the power of the unit and the external AV signal source and then press the

SOURCE button to select COMPOSITE or S-VIDEO mode.

Note: The L/R audio input jacks can be used in both COMPOSITE and S-VIDEO modes.

Daewoo DSL19M1WC User Manual

Questions and Answers: