6–18 SERVICE AND VEHICLE CARE
ADDING POWER STEERING FLUID
1. Wipe the cap and the top of the res-
ervoir clean.
2. Unscrew the cap.
3. Add the power steering fluid. Be sure
to maintain the level between MIN
and MAX mark.
4. Replace the cap.
vv
vv
v CAUTION
An overflow of the fluid may cause
the fluid to burn or discolor
paintwork.
• Do not overfill the reservoir.
An engine fire can cause personal in-
juries and damage your vehicle and
other property.
1. Turn the engine off.
2. Check the fluid level. It should be be-
tween MIN and MAX on the reser-
voir.
If level drops to or below MIN, add
fluid as specified in this manual.
POWER STEERING FLUID
CHECKING POWER STEERING FLUID
LEVEL
Regularly check power steering fluid
level.
The power steering fluid reservoir is lo-
cated next to the battery.
vv
vv
v CAUTION
• Do not operate vehicle without the
required amount of power steering
fluid.
To do so can damage power steering
system of your vehicle, leading to
costly repairs.
S4W6181A
To Next Page
Loading...
Need help?
General
