2–18 INSTRUMENTS AND CONTROLS
FRONT FOG LAMP SWITCH*
Fog lamps provide:
• Extra illumination to the sides of the
road ahead.
• Improved visibility in fog or snow.
To turn the fog lamps on:
• Make sure the low-beam headlamps
are on.
• Turn the ring on the middle of the
combination switch lever to ON.
The fog lamp indicator in the instru-
ment panel illuminates when the fog
lamps are turned on.
To turn the fog lamps off, turn the ring
to the OFF position.
REAR FOG LAMP BUTTON
To turn the rear fog lamp on, push this
button when the low beam head lamps
are on.
The rear fog lamp indicator in the in-
strument panel illuminates when the
rear fog lamp is turned on.
To turn the rear fog lamp off, push the
button again.
WINDSHIELD WIPERS
vv
vv
v CAUTION
• Less than clear vision for the driver
can lead to an accident resulting in
personal injury and damage to
your vehicle or other property.
• Do not operate the windshield wip-
ers when the windshield is dry or
obstructed, as with snow or ice.
Using the wipers on an obstructed
windshield can damage the wiper
blades, wiper motor, and glass.
• Check blades are not frozen to win-
dows before operating in cold
weather. Wiper operation while
blade is frozen can damage wiper
motor.
H
C
F
E
S3W2291A
S3W2301A
To Next Page
Loading...
Need help?
General
