2–16 INSTRUMENTS AND CONTROLS
The headlamps will turn off automati-
cally when the ignition switch is turned
to LOCK or ACC.
BATTERY SAVER
Battery saver is to prevent the battery
from being discharged.
When you leave the light switch in the
“ k ” position, remove the key, and
open the driver’s door, the lights will
turn off automatically.
TURN SIGNAL LEVER
RIGHT turn: Move the turn signal le-
ver up.
LEFT turn: Move the turn signal lever
down.
The turn signal will shut off automati-
cally and the lever will return to its nor-
mal position after you have completed
the turn.
When changing lanes, move the turn
signal lever part way and hold it there.
When you release the lever, it will re-
turn to its normal position.
H
C
F
E
S3W2241A
H
C
F
E
NOTE
If you remove the key and open the
driver’s door when the dome lamp is
“ON”, the dome lamp will not turn
off automatically.
SWITCHES AND CONTROLS
LIGHT SWITCH
To turn the head, tail and parking
lamps on or off, twist the end of the
combination switch lever.
The light switch has three positions which
activate various lamp functions as follows:
• OFF: All the lights are off.
•
k
: The parking lamps, tail lamps,
license plate lamps, and instrument
panel lamps are illuminated.
•
L
: The low-beam headlamps and
all of the above lamps are illumi-
nated.
To Next Page
Loading...
Need help?
General
