INSTRUMENTS AND CONTROLS 2–17
PASSING LIGHT SWITCH
To flash the high-beam headlamps, pull
the combination switch lever toward
you and release it. The lever will re-
turn to its normal position when you
release it.
The high-beam headlamps will stay on
as long as you hold the combination
switch lever toward you.
HIGH BEAM SWITCH
To turn the high-beam headlamps on:
• Make sure the low-beam headlamps
are on.
• Push the combination switch lever to-
ward the instrument panel.
The headlamp high-beam indicator il-
luminates when headlamps are on high
beam.
To switch from high-beam headlamps
to low-beam, pull the combination
switch lever back toward you, to its
normal position.
vv
vv
v CAUTION
• Always switch the high-beam
headlamps to low-beam when you
approach on coming vehicles or
when other vehicles ahead.
High-beam headlamps can tempo-
rarily blind other drivers, which
could result in a collision.
H
C
F
E
S3W2271A
H
C
F
E
To Next Page
Loading...
Need help?
General
