19
3) Click
Confirm
.
Step 4 Configure other parameters.
Table 4-6 Description of other parameters
Parameter Description
Display Video Image
●
Screen split
: You can view the video image of the added channels
by 1, 2, 3, or 4 splits.
●
Switching time(seconds)
: Switch to play the video of another
added channel after the defined time.
●
Channel selection
: Select the channel to be played in each screen
split.
Play Media
Click to add media (video or picture).
●
Select media, and then click to delete it.
●
Drag the media to sort them.
●
Pictures are displayed for 10 seconds by default and videos to their
end.
Only one kind of media can be played at a time.
Display Comparison
Results
Enable or disable voice broadcast and temperature information and
display face comparison results.
●
Voice broadcast: Click to enable voice broadcast.
The prompt that you customize manually does not support voice
broadcast.
●
Display successful comparison results: Click , and then select or
customize the prompt to be displayed when face comparison is
successful.
●
Display failed comparison results: Click , and then select or
customize the prompt to be displayed when face comparison fails.
●
Temperature: Click to enable temperature.
The temperature function is available only when the box is
associated with the turnstiles from the same manufacturer.
Display LOGO
Click to add a picture, which will be the logo displayed on the
upper-right corner when a face attendance project is played.
The uploaded picture must be a .png file with a transparent
background. The picture must be within 430 pixels in width and 80
pixels in height.
Step 5 Click
Preview
on the upper-right corner to preview the project to be played.
Step 6 Click
Publish
on the upper-right corner to play your project immediately.
To Next Page
Loading...
Need help?
General
