User's Manual
134
Figure 5-100 Stranger alarm (Analytics+ by recorder)
1. Select Stranger Alarm in Analytics+ Mode.
2. Click enable the function.
3. Configure the alarm linkage actions. For details on alarm linkage, see Table
5-43.
Step 5 Click Apply.
5.9.5.4.2 Configuring Analytics+ by camera
Prerequisites
Make sure the connected camera supports Face Detection+.
Procedure
Step 1 Select Main Menu > Analytics+ > Parameters > Face Detection+.
Step 2 Select the channel, enable the function, and select Analytics+ by camera in the Type
list.
To Next Page
Loading...
Need help?
General
