User's Manual
163
Figure 5-131 Schedule and alarm linkage
1) Click .
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3) Configure alarm linkage. For details, see Table 5-43.
4) Click Apply.
Step 7 Select Enable checkbox and then click Apply.
5.9.6.3 Analytics+ Search (IVS)
Background Information
You can search for IVS detection results.
Procedure
Step 1 Select Main Menu > Analytics+ > Analytics+ Search > IVS.
To Next Page
Loading...
Need help?
General
