Daikin 2MXM50M User Manual

ESIE16-02B | Part 1. Introduction 1.3. General operation
4/04/17 | Version 1.0 Page 13
RA R32 Split & multi split M-Series
1.3. General operation
• These split units are used for comfort cooling and are equipped with an inverter.
• The rotation speed rps (= rotation per second) of the inverter driven compressor, modulated by the inverter, can be varied
according the required capacity in the room.
• The compressor capacity step is changed in order to reach target compression ratio. The target compression ratio is calculated
from deviation between actual and target condensation and evaporation temperature.
• Tc (condensing temperature) is used in heating mode.
• Te (evaporation temperature) is used if any indoor unit operates in cooling mode.
• The evaporating temperature in the heat exchanger is controlled by the electronic expansion valve.
• When indoor unit is selecting heating mode, discharge gas is supplied by the outdoor unit to the indoor unit.
• When indoor unit is selecting cooling mode, liquid refrigerant is supplied by the outdoor unit to the indoor unit.
1. Compressor 4. Outdoor heat exchanger
2. Indoor heat exchanger 5. 4-way valve
3. Expansion valve 6. Stop valves

Daikin 2MXM50M Specifications

General

Type	Air conditioner outdoor unit
Multi-split	-
Product color	White
Gas hose diameter	9.5 mm
Drain hose diameter	16 mm
Liquid hose diameter	6.35 mm
Outdoor unit depth	285 mm
Outdoor unit width	765 mm
Outdoor unit height	550 mm
Outdoor unit weight	41000 g
Outdoor unit noise level	486.35 dB
Outdoor unit package depth	357 mm
Outdoor unit package width	900 mm
Outdoor unit package height	614 mm
Outdoor unit package weight	43000 g
Outdoor unit sound power level	62 dB
Current	16 A
AC input voltage	220 - 240 V
AC input frequency	50 Hz