Daikin Altherma 3 H MT W User Manual

7 | Unit installation
Installer reference guide
72
EPRA08~12EAV3+W1 + ETVH12SU18+23EA6V
Daikin Altherma 3 H MT F
4P644482-1 – 2021.03
1
2
2×
T25
3 Place the switch box lower on the unit. Use the 2 hinges located lower on the
unit.
3
3
7.2.7 To close the indoor unit
1 Close the cover of the switch box.
2 Put the switch box back into place.
3 Reinstall the top panel.
4 Reinstall the side panels.
5 Reinstall the front panel.
6 Reconnect the cables to the user interface panel.
7 Reinstall the user interface panel.
NOTICE
When closing the indoor unit cover, make sure that the tightening torque does NOT
exceed 4.1N•m.
7.3 Mounting the outdoor unit
7.3.1 About mounting the outdoor unit
When
You have to mount the outdoor unit before you can connect the water piping.

Daikin Altherma 3 H MT W Specifications

General

Brand	Daikin
Model	Altherma 3 H MT W
Category	Heat Pump
Language	English