ARC433 Series Si10-416_B
356 Operation
To set the clock
1. Press “CLOCK button”.
is displayed.
blinks.
2.
Press “TIMER setting button” to
set the clock to the present time.
Holding down “ ” or “ ” button
rapidly increases or decreases the time
display.
3. Press “CLOCK button”.
blinks.
Turn the breaker ON
•
Turning ON the breaker opens the flap, then
closes it again. (This is a normal procedure.)
NOTE
Tips for saving energy
Please note
Recommended temperature setting
For cooling:26
˚
C – 28
˚
C
For heating:20
˚
C – 24
˚
C
•
Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps
save energy.
•
Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling
(heating) effect.
•
Clogged air filters cause inefficient operation and waste
energy. Clean them once in about every two weeks.
•
The air conditioner always consumes 15-35 watts of electricity
even while it is not operating.
•
If you are not going to use the air conditioner for a long period,
for example in spring or autumn, turn the breaker OFF.
To Next Page
Loading...
Need help?
General
