14 Configuration
Installer and user reference guide
20
BRC1H519W+K+S
Wired remote controller
4P513689-1A – 2018.03
Operation state Status indicator behaviour
0 (Normal) 1 (Hotel setting 1) 2 (Hotel setting 2)
Error Blinking (no change) (no change)
Warning ON ON ON (when the backlight goes into
faint state, the status indicator
turns OFF)
Setting of status indicator intensity ON ON ON
Pairing with indoor unit Blinking Blinking Blinking
14.1.5 Miscellaneous settings
Group address and Airnet address (DIII)
Group address
To control the system with central control equipment, you need to
set addresses for:
▪ Groups ("Group"), and/or
▪ Units ("Group(Unit)").
The Group address and Airnet address menu has two levels. You
define groups and/or units in the first level, and set or release
addresses for those groups and/or units in the second.
Address Description
First level Group (Group)
A group is a group of indoor units.
When setting addresses for groups, you do NOT have to define a unit number.
Unit (Group(Unit))
A unit is an individual indoor unit.
Define the indoor unit for which you want to set an address.
To Next Page
Loading...
Need help?
General
